Radio Shack 43-3817 - Manual (Page 19)

Te
lephon
e Op
eration
19
character. Hold down CH/DEL to delete all
characters.
6. Press SEL .
Ijeh[ýDkcX[hý Ijeh[ýDkcX[hý Ijeh[ýDkcX[hý Ijeh[ýDkcX[hý
appears.
7. Enter the phone number and any tone or pause
entries (see “Using Tone Services on a Pulse
Line” on Page 17 and “Entering a Pause” on
Page 20).
±ý
8. Press SEL . The phone beeps and
C[cehoýdý C[cehoýdý C[cehoýdý C[cehoýdý
IIIIjeh[Z jeh[Z jeh[Z jeh[Z
(
dddd
is the memory location number)
appears.
C[cehoýIjeh[ C[cehoýIjeh[ C[cehoýIjeh[ C[cehoýIjeh[
reappears. Repeat Steps 3–8 to
store more numbers.
9. When you finish, press END .
To replace a stored number, store a new one in its
place.
'FKVKPI"QT"&GNGVKPI"C"0WODGT"KP"
/GOQT[
1. Lift the handset.
2. Hold down MEM until
C[cehoýIjeh[ C[cehoýIjeh[ C[cehoýIjeh[ C[cehoýIjeh[
and a list of
memory location numbers appear.
3. Choose a memory location ( 0 – 9 ) by pressing a
number or by repeatedly pressing 8 or 9 .
4. Press SEL . Press 8 or 9 to select one of three
options, then press SEL to confirm your
selection.
;Z_jýC[cehoýd ;Z_jýC[cehoýd ;Z_jýC[cehoýd ;Z_jýC[cehoýd
— Edit the record as described in
Steps 5 through 8 of “Storing a Name and
Number in Memory” on Page 18.
:[b[j[ýC[cehoýd :[b[j[ýC[cehoýd :[b[j[ýC[cehoýd :[b[j[ýC[cehoýd
— The display prompts you to
confirm the deletion. Press 8 to move the
±
"016'"
±
"
Each tone or pause entry
uses one digit of memory.