Roland KF-7 - Manual (Page 91)

91
Chapter 4 Recording and Saving the Performance
Chapter 4
Recording a New Song (New Song)
This records keyboard performances without the use of the internal songs or
Automatic Accompaniment.
fig.panel4-1
Settings for recording performances
1.
Press One Touch Program [Piano] button.
2.
Decide on the tone of the performance.
Use the Tone buttons and the touch screen to select the tone.
When you have finished choosing the settings, touch to display the Basic
screen.
Recording settings
3.
Press the [ (Rec)] button.
You press the [ (Rec)] button and the following messages will appear, when a
song has already been recorded.
fig.m-rec.eps_60
Touch .
This switches the KF-7 to the settings required for recording a new song.
The KF-7 is put in recording standby.
To cancel recording, press the [ (Rec)] button once more.
4.
Decide on the tempo and beat.
If necessary, press the [Metronome] button to play the metronome.
When you have finished making the settings, touch to display the Basic
screen.
Start recording
5.
Press the [ (Play/Stop)] button.
A two-bar count-in plays, then recording starts.
Even without pressing the [ (Play/Stop)] button, recording starts when you
play the keyboard. There is no count-in played when you start by playing rather than
pushing the [ (Play/Stop)] button.
If you select
when a song has already been
recorded, the “OK to delete
song?” prompt appears in the
screen. For more detailed
information, refer to “If the
following screen appears” (p.
90).