Roland KF-7 - Manual (Page 29)

29
Chapter 1 Performance
Chapter 1
❍
Selecting the tone to which the effect is applied
With “Keyboard” in Advanced 3D set to On, you can select the parts to which the 3D
effect is to be applied when the keyboard is played.
1.
Press the [Advanced 3D] button and watch the indicator light up.
2.
On the Advanced 3D screen, touch .
A screen like the one shown below appears.
fig.d-adv3dopt.eps_60
3.
Touch or .
When you touch , you return to the Advanced 3D screen.
Display Explanation
All Parts
The effect is applied to all tones played with the keyboard (the left-
hand tone, right-hand tone, and layer tone).
Layer Part
The effect is applied only to the layer part.
When not using a layer performance (p. 24), the Advanced 3D effect
is not applied to the keyboard performance, even if on
the Advance 3D screen is set to On.