Driving the tractor and implement, Driving the tractor and implement -19, Operation – Rhino Mounts SE4 User Manual
Page 99: Opera t ion
OPERATION
SE4 05/05
Operation Section 4-19
© 2005 Alamo Group Inc.
OPERA
T
ION
9. DRIVING THE TRACTOR AND IMPLEMENT
Safe tractor transport requires the operator possess a thorough knowledge of the model being operated and
precautions to take while driving with an attached implement. Ensure the tractor has the capacity to handle the
weight of the implement and the tractor operating controls are set for safe transport. To ensure safety while
driving the tractor with an attached implement, review the following. OPS-U- 0012
Inspect the Blades daily for abnormal wear. REPLACE BOTH BLADES on that carrier
IMMEDIATELY if either blade has:
•
Become bent or deformed from it’s original shape or
•
Any cracks are visible, or
•
Deep gouges in the blades surface are persent, or
•
Gouges or chipped areas in the cutting edge are larger than 1/2”, or
•
The material on the leading edge has been worn away by more than 1/2”
Failure to replace abnormally worn blades may lead to catastrophic failure of the blades and
ejection of the broken part with tremendous force which may cause serious bodily injury or
death. OPS-U-0032
Never run the Tractor engine in a closed building or without adequate ventilation. The exhaust
fumes can be hazardous to your health.
(SG-23)