Rhino Mounts SE4 - Manual (Page 83)

OPERATION
SE4 05/05 Operation Section 4-3
© 2005 Alamo Group Inc.
OPERA
T
ION
Standard Equipment and Specifications
SE4
Horsepower Required (Min.) 15 HP
Cutting Capacity (Max.) 1”
Cutting Height 1-1/4” Min.
Safety Deflector Std.
Cutting Width 48”
Transport Width 51-3/16”
Overall Length 83”
Weight (Approx.) 435 lbs.
Hitch CAT I
Blade Carrier Pan
Blade Tip Speed (FPM) 13,097
Gearbox Rating:
540 RPM 30 HP*
Output Shaft Diameter 1-9/16”
Blade Tip Speed:
540 RPM 13,097 FPM
Driveline Size Cat 3
Deck Thickness 11 Ga.
Side Skirt 11 Ga. x 6”
*Ratings based on actual field performance.
The Mower is designed for certain mowing applications and is rated to cut up to a specific size
vegetation (see Mower Standard Equipment and Specifications). DO NOT use this mower to cut
vegetation above the Mower’s rated capacity or to cut any type of non-vegetative material. Only
operate this Mower on a properly sized and equipped Tractor. Operating this Mower in an
application for which it is not designed and/or operating the Mower with the wrong size Tractor can
cause Mower component damage and equipment failure resulting in possible serious injury or
death.
(SGM-14)