Rhino Mounts SE4 - Manual (Page 22)

SAFETY
SE4 05/05 Safety Section 1-16
© 2005 Alamo Group Inc.
SAFETY Storage and Parking Safety Instructions and Practices
Concluding Safety Instructions and Practices
DO NOT weld or repair rotating mower components. Welds and other repairs may cause severe
vibration and/or component failure resulting in part being thrown from the mower causing serious
bodily injury. See your Authorized Dealer for proper repairs.
(SGM-13)
Be sure you have adequate knowledge of the property you will be working on. Take time to make
yourself aware of any area underground lines or cables. Contact with buried lines or cable could
result in serious injury or death.
(STL-1)
In wet conditions where there is a likelihood of material collecting on the Implement, make certain
that this material is removed before travelling on public roadways.
(STL-7)
To prevent tipping of Implement when stored in folded position, use carrying wheels or adequate
stands on center frame.
(S3PT-6)
PARTS INFORMATION
Rhino mowers use balanced and matched system components for blade carriers, blades, cuttershafts, knives,
knife hangers, rollers, drivetrain components, and bearings. These parts are made and tested to Rhino
specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of “will fit”
parts may reduce mower performance, void warranties, and present a safety hazard. Use genuine Rhino
mower parts for economy and safety.
(SPRM-1)
SEE YOUR RHINO DEALER
In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment,
hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper
training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer
also to Safety Messages and operation instruction in each of the appropriate sections of the Tractor and
Equipment Manuals. Pay close attention to the Safety Signs affixed to the Tractor and Equipment.
(SG-18)