Introduction – Rhino Mounts SE4 User Manual

Page 75

INTRODUCTION

SE4 05/05

Introduction Section 2-3

INTRODUCTION

Your RHINO SE4 & 42 mower is designed for light-duty cutting such as pasture mowing, weed, and grass
control. With a reasonable amount of preventive maintenance, your Mower will provide years of dependable
service.

For Non-Agricultural use, OSHA, ASAE, SAE, and ANSI standards require the use of Chain
Guards or Solid Skirts at all times. The Cutter manufacturer strongly recommends the use of
Chain Guards or Solid Skirts for Agricultural purposes as well, to reduce the risk of property
damage, serious bodily injury, or even death from objects thrown out by or from contact with the
Cutting Blades.

At least 20% or the tractor’s weight must be on the front tires with the implement lifted to provide
adequate traction for safe steering under good conditions. Slow down on hills, rough terrain,
and curves.

Front and rear, and left and right are determined by the normal direction of travel (the same as on your
automobile).