Renesas FLASH Development Toolkit 3.07 - Manual (Page 44)

30
3.5.2 Generic Boot - Choose Device and Kernel
Select ‘Generic Boot Device’ (or a device supported by Generic Boot) and click ‘Next’.
Figure 3-13 Generic Boot Device Selection
Note - Some Protocol C devices which appear in the device list are supported by using Generic Boot. This
means that when one of these devices is selected in the Project Wizard, FDT will behave as if
"Generic BOOT Device" was selected, and will connect to the device to obtain the device
characteristics instead of using an existing fcf file for this information.
Figure 3-14 Device Support via Generic Boot