Renesas FLASH Development Toolkit 3.07 - Manual (Page 102)

88
project to work with many Generic Boot devices. If this option is set to "Query", FDT will ask you to select
whether to reinterrogate the device. Double click to edit the setting.
Security Protection
This option controls whether FDT should security protect QzROM devices as it disconnects. It echoes the
setting on the QzROM toolbar (see 2.1.2). Select “Automatic” to always protect the device at
disconnection. Select “Prompt” to query the user what to do and select “None” to never protect the device
at disconnect. NB – It might not be possible to reconnect to a protected device.
Function Map
This section is for Protocol A (Legacy) kernels only.
8.5.5 Modules Tab
This shows each Kernel file name. Some entries may be blank because most kernels do not use all of the
modules.
Figure 8-12 Module Properties