Radio Shack 15-2107 User Manual

Page 41

Operation

3. Touch the down arrow two times.

B;7HD

appears.

Note: If you scroll past

B;7HD

, touch the up key to

return to it.

4. Touch

SELECT

. The last selected mode appears.

5. If needed, touch a mode key to select a different

device to be learned.

6. Place your original device’s remote control head-to-

head (about 2 inches apart) with the 8-In-One.

Note: For best results, use low-level ambient light-
ing and stay away from high levels of natural day-
light or energy-efficient fluorescent lights.

7. On the original remote control, hold down the key

you want to be learned. On the 8-In-One, touch a
key where you want the learned data to reside. The
red light flashes rapidly and

B;7HD?D=

appears.

Note: Be sure to press (or touch) each key within 5
seconds. Otherwise, an error message appears as
a reminder to perform the actions listed in this step.

?DL7B?:

appears, the selected key cannot be

learned.

IK99;II

appears, the selected key was learned.

If there is a problem,

;HHEH

appears. Repeat Step 6

until

IK99;II

appears.

To learn other functions from the same device’s
remote control, repeat Steps 6 and 7.

8. To exit programming, hold down

for at least 3 sec-

onds.

;N?J?D=

appears, then the remote control

returns to the last-used mode screen.

If desired, repeat Steps 2–8 to learn functions from a dif-
ferent device’s remote control.