Setting the clock – Radio Shack 15-2107 User Manual

Page 22

Preparation

When

BEMý87JJ

appears or the remote stops operating

properly, replace the batteries.

Warning: Dispose of old batteries promptly and proper-
ly. Do not burn or bury them.

Caution: If you do not plan to use the remote for a
month or longer, remove the batteries. Batteries can
leak chemicals that can destroy electronic parts.

SETTING THE CLOCK

Note: You must reset the clock each time you replace
the batteries.

1. Hold down

for at least 3 seconds.

9E:;ý I;J

appears.

Note: To exit setup at any time, hold down

again

for at least 3 seconds.

;N?J?D=

appears, followed by

the last-used mode screen.

2. Touch the down arrow six times until

9BE9Aý I;J

appears.

Note: If you scroll past

9BE9AýI;J

, touch the up arrow

to scroll to it.

3. Touch

SELECT

. The day and time appear and the

day flashes.

4. Repeatedly touch the up or down arrows until the

current day appears. Touch

SELECT

. The hour

flashes.

5. Repeatedly touch the up or down arrows until the

current hour (and

) appears. Touch

SELECT

. The minute digit flashes.

6. Repeatedly touch the up or down arrows until the

current minute appears. Touch

SELECT

. The day

flashes.

7. If you made an error, repeat Steps 4–6 to correctly

set the values.