Programming home theater macros – Radio Shack 15-2107 User Manual

Page 32

Preparation

Programming Home Theater Macros

The Home Theater mode also includes three exclusive
macro keys (

SET 1

SET 2

, and

SET 3

). You can store up

to 15 keystrokes (including learned keys) on each macro
key. For example, you can create a macro that powers
on each device in your home theater system with the
convenience of a single key touch.

Note: Macros can include learned keys, but not moved
keys.

1. Turn off all home entertainment devices.

2. Hold down

for at least 3 seconds.

9E:;ý I;J

appears.

3. Touch the down arrow four times.

C79HEý A;O

appears.

Note: If you scroll past

C79HEý A;O

, touch the up

arrow to return to it.

4. Touch

SELECT

I;BýC79HE

appears.

5. Press a macro key (

SET 1

SET 2

, or

SET 3

;DJ

C79HE

appears. For the example, press

SET 1

Note: Pressing a previously-programmed macro
key will overwrite its contents.

6. Press the appropriate keys in the desired order.

For the example, entering the following keys in the
below order to program

SET 1

to turn on the TV and

cable box, then tune the cable to channel 061.

Touch

I;BýJEý;D:

appears.

Note:

I;Bý JEý ;D:

prompts you to press

SELECT

when you reach the end of the macro sequence you
are entering.

Press

POWER

to turn on the TV.

Touch

CAB/SAT

to select the cable box.

Press

POWER

to turn on the cable box.