Radio Shack 15-2107 - Manual (Page 34)

34
Preparation
Touch the up or down arrow until the desired hour
appears (and
7C 7C 7C 7C
or
FC FC FC FC
). For the example, scroll to
((((
FC FC FC FC
. Touch SELECT . The minutes flash.
Touch the up or down arrow until the desired min-
utes appear (for the example, scroll to
&& && && &&
). Touch
SELECT . The day flashes.
Verify the desired day and time. If needed, repeat
Step 5 to correctly set the values.
To save the beginning day and time settings, hold
down
SELECT until
8;=ý C79HE 8;=ý C79HE 8;=ý C79HE 8;=ý C79HE
appears. Then
;DJ ;DJ ;DJ ;DJ
C79HE C79HE C79HE C79HE
appears.
6. Enter the next step of the macro sequence. For the
example, you have entered the beginning time for
the macro and you must now program the VCR to
turn on and record your television show. Enter the
following data:
Touch the mode key of the desired device (for the
example, touch
VCR/DVD ).
I;BýJEý;D: I;BýJEý;D: I;BýJEý;D: I;BýJEý;D:
appears and
remains on the screen until you finish programming
this step of the macro.
Press POWER to turn on the VCR.
Touch 0 4 to enter channel 04.
Touch REC .
Hold down SELECT until
;D:ýJ?C; ;D:ýJ?C; ;D:ýJ?C; ;D:ýJ?C;
appears.
Enter the ending day and time when your TV pro-
gram stops.
Note: If you have chosen
C¶< C¶< C¶< C¶<
as the beginning day,
the day field cannot be changed.
Touch the up or down arrow until the desired day
appears (for the example, scroll to
C¶< C¶< C¶< C¶<
). Touch
SELECT . The hour flashes.
Touch the up or down arrow until the desired hour
appears (AM or PM). For the example, scroll to
))))
FC FC FC FC
. Touch SELECT . The minutes flash.