Preparation, Installing batteries – Radio Shack 15-2107 User Manual
Page 21
21
Preparation
ˆ
Preparation
If you have any problems programming your remote, call
customer service at 888-269-8705.
INSTALLING BATTERIES
Your remote requires four AAA batteries (not supplied)
for power. For the best performance and longest life, we
recommend RadioShack alkaline batteries.
Cautions:
• Use only fresh batteries of the required size and
recommended type.
• Do not mix old and new batteries or different types
of batteries (standard or alkaline).
Follow these steps to install batteries.
1. Push in the battery compartment cover’s tab and lift
off the cover.
2. Place the batteries in the compartment as indicated
by the polarity symbols (+ and –) marked inside.
3. Replace the cover. The tab should click when the
cover is locked.
If the batteries are inserted correctly, the entire
touch screen display becomes active. After few sec-
onds of inactivity, the touch screen turns off to con-
serve battery life.
Mode Keys
Use TV, VCR/DVD, CAB/SAT, RECVR,
AUX 1, AUX 2, AUX 3, and AUX 4 to
select devices. Use THEATER to select
Home Theater mode. Use SET 1, SET 2,
and SET 3 to run programmed macros in
Home Theater mode.
Control
Function