Radio Shack 15-2107 User Manual

Page 24

Preparation

down the codes for the brand of each device you
want to program.

Note: Some manufacturers may have several
codes listed. Try each until you find the right one. If
you cannot find the correct code, see “Manufacturer
Code Search” on Page 25.

2. Turn on all home entertainment devices.

3. Hold down

for at least 3 seconds.

9E:;ý I;J

appears.

4. Touch

SELECT

. The last selected mode appears.

Note: To exit this mode at any time, hold down

again for at least 3 seconds.

;N?J?D=

appears, then

the last-used mode screen.

5. Touch the desired mode key (

VCR/DVD

CAB/

SAT

RECVR

AUX 1

AUX 2

AUX 3

, or

AUX 4

). The

default or previously set device and code appear.

6. If the displayed device is not the desired type, use

the up or down arrows to scroll to a device you
want. Then touch

SELECT

. The selected device and

its (default or previously set) code appear.

Note: There are 13 different devices available for
setup. Refer to “A Quick Look at the Keys” on
Page 6 for additional information on a desired
device.

7. Using the keypad, enter the first 4-digit manufac-

turer’s code for the desired device and then touch

SELECT

. If you’ve entered a correct code,

IK99;II

appears.

If the code is not correct

DDDDEJý

EJý

appears instead.

Enter the next code until

IK99;II

appears.

Note: For TV/VCR combinations, touch

VCR/DVD

Step 4 and use the VCR code listed for your model
under “TV/VCR Combo Codes” on Page 60. If your
TV/VCR combination also lists a TV code, you must
program the TV separately by repeating Steps 4