Connecting & setting up the pc-300, Power supply – Roland PC-300 User Manual

Page 9

Text mode
Original mode

6. Connecting & setting up the PC-300

Owner’s Manual

The PC-300 can be powered using the
supplied adapter, or via a USB connection
with your computer.

Power supply

Using the USB power supply

1. Connect the PC-300’s USB port to a
free USB port of your PC (see page 10).
This requires the use of the supplied USB
cable.

2. Switch on your computer.

Using the supplied adapter

Note: Be sure to use only the specified AC
adapter (ACA series). Using any other type
may cause malfunction or electric shock.
Note: If the unit is to remain unused for an
extended period of time, unplug the power
cord.

1. Check that the PC-300 is OFF.
2. Connect the AC adapter to the DC IN
jack, and the other end to a power outlet.

Set to "ON (USB)"

To a USB connector of

you computer

ENGLISH