Roland PC-300 - Manual (Page 11)

Computer connected using the serial connector on the sound module
1. Connect the PC-300’s MIDI OUT port to the MIDI IN connector on the sound module
you wish to control.
2. Set the PC-300’s KEYBOARD/PC switch to “KEYBOARD”. See page 8.
Computer connected via the MIDI IN connector on the sound module
1. Connect the PC-300’s MIDI OUT port to the MIDI IN connector on the MIDI process-
ing unit (MPU series, sound card, or the like).
2. Set the PC-300’s KEYBOARD/PC switch to “KEYBOARD”. See page 8.
Note: This setup requires that you activate the sequencer program’s MIDI Thru/Soft Thru/MIDI
Echo function.
MIDI OUT connector
MIDI IN
connector
COMPUTER switch
(set to MIDI)
PC 300
Sound module
Computer
MIDI OUT
connector
MIDI IN connector
MIDI OUT connector
COMPUTER
connector
MIDI IN
connector
RS-232C connector
COMPUTER switch
(set to PC-2)
PC-300
Sound module
Computer
Computer cable
9
Owner’s Manual
ENGLISH