RCA DRC8000N - Manual (Page 22)

Explanation of Buttons
You can use this remote to operate the DVD Recorder, and to access the features
available.The remote is also designed to operate most RCA, GE, and Proscan
components (TVs and satellite receivers). If you have another brand, you can program
the remote control to operate those components (go to page 21 for instructions).
The descriptions that follow describe how each button works when operating the DVD
Recorder. Many buttons will perform different function depending upon the type of disc
and menu functions of the disc.
Indicator light Used to indicate status of remote control when programming it to
operate other components. Also, indicates when batteries are low by flickering when you
press a button on the remote.
0-9 (Number buttons) Use the number buttons to input information such as chapter
numbers, track numbers, to make selections on some menu screens, and/or to change
channels.
Arrow buttons (up, down, left, right) Use the arrow buttons to highlight options that
appear on the screen (the arrow buttons move the highlight in the corresponding
directions — up arrow moves the highlight up; left arrow moves the highlight left, etc.).
ADVANCE When playing a disc, moves forward approximately 30 seconds. Not
applicable for VCDs or mp3 files.
AGAIN Accesses the Scene Again™ feature — replays the last several seconds
(approximately 10) of the DVD disc you’re playing. Not applicable for VCDs or mp3 files.
ANGLE Accesses various camera angles that might have been added to a pre-recorded
disc when it was created. Not available on all discs.
ANTENNA In SAT•CABLE mode, functions as a Satellite/Receiver button for RCA
satellite receivers.
CH + Advances to the next chapter or track when you’re playing discs. Goes to the
next channel in the channel list when watching TV.
CH – Goes back to the preceding chapter or track when you’re playing a disc. Goes to
the previous channel in the channel list when watching TV.
CLEAR Removes on-screen menus and displays.
DVD Puts the remote in DVD mode so it operates the DVD Recorder.
FORWARD Searches forward through the disc.
GO BACK Returns you to the previous menu.When watching TV, goes back to the
previous channel.
GUIDE Accesses the GUIDE Plus+ system when watching TV or using the DVD
Recorder’s menu system.
INFO Displays the on-screen Info Display (for details about the Info Display, go to page 36.)
INPUT Accesses the Input Jacks on the Recorder (RF ANTENNA/CABLE INPUT,
INPUT 1, and INPUT 2 on the front of the DVD Recorder).
LIVE When main menu is on the screen, provides quick access to watch TV.
MENU When you’re not playing a disc, accesses the DVD Recorder’s menu.When
you’re playing a disc, accesses the disc’s menu, if one is available.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
OPEN•CLOSE Opens and closes the disc tray.
OK When a menu is on the screen, selects the highlighted item.
ON•OFF Turns the DVD Recorder on and off.
PAUSE Pauses disc play or recording.
PLAY Begins disc play.
RECORD Records programming.
REVERSE Searches backward through the disc.
Chapter 2: The Remote Control
20
Graphics contained within this publication are for representation only.
ON • OF F
MUTE
RETU R N
G O• B A CK
INPUT ANTEN NA
1 2 3
4 5 6
7 8
0
9
VOL CH
SAT• C A BLE TV
DVD
MEN U CLEAR
INFO
ANGLE
GUIDE
OPEN• CLOSE
ZO OM
REVERSE PLAY FORWAR D
PAUSE STOP RECOR D
AGAIN ADVANCE LIVE
The Universal Remote Control that came with
your DVD Recorder operates most RCA, GE,
and Proscan branded components.
Additionally, the remote is capable of being
programmed to operate many other brands
and models of TVs, satellite receivers, or
cable boxes.
Indicator light
SAT•CABLE Puts the remote in Satellite or Cable mode in order for the remote to operate a satellite receiver or cable box.This remote is capable of
being programmed to operate most brands of satellite receivers and cable boxes.This remote is already programmed to operate RCA, GE, and Proscan
brand satellite receivers.
STOP Stops playback or recording.
TV Puts the remote in TV mode in order for it to operate your TV.This remote is already programmed to operate RCA, GE, and Proscan brand satellite
receivers.This remote is capable of being programmed to operate many brands of TVs.
VOL +/- If your remote is capable of operating your TV, increases and decreases the volume level.
ZOOM Enlarges the image on the screen so you can zoom in on details.To pan and scan after you’ve zoomed in on an image, use the arrow buttons.
The Zoom feature isn’t available on all discs.Typically, it works with DVD discs and CDs with JPEG files.