Renesas Emulation Probe for M32C/87 Group M30870T-EPB - Manual (Page 66)

M30870T-EPB User’s Manual 3. Usage (Emulator Debugger)
REJ10J0482-0300 Rev.3.00 February 16, 2006
3.4 Hardware Breakpoint Setting Window
(1) Breakpoint setup dialog box
1. Opening the hardware breakpoint setup dialog box
Hardware Break Point
2. Hardware Break Point Setting Window in initial state
3. Opening the break event setting dialog box
H/W breakpoint Setting Window in initial
state
Select the “Enable H/W Break” check box, and this break
function will be enabled, allowing you to set hardware
breakpoints.
Clicking this button opens the hardware breakpoint setup
dialog box.
Setting Break Event
Click the event line at which you want set a break event.
Page 66 of 104