2 if an error is detected in the self-check, Important – Renesas Emulation Probe for M32C/87 Group M30870T-EPB User Manual

Page 28

Text mode
Original mode

M30870T-EPB User’s Manual

2. Setup

REJ10J0482-0300 Rev.3.00 February 16, 2006

2.8.2 If an Error is Detected in the Self-check
If the self-check does not result normally (ERROR 1 to ERROR 4 in Figure 2.6), check the following.

(1) Recheck the connection of the emulation probe and PC7501.
(2) Redownload the proper firmware.

IMPORTANT

Note on the Self-check:

If the self-check does not result normally (excluding user system errors), the emulation probe may be damaged.

Then contact your local distributor.

Page 28 of 104