Renesas Emulation Probe for M32C/87 Group M30870T-EPB - Manual (Page 29)

M30870T-EPB User’s Manual 2. Setup
REJ10J0482-0300 Rev.3.00 February 16, 2006
2.9 Connecting the User System
There are eight ways available to connect the emulation probe to user systems as shown in Figure 2.7.
LCC socket
100-pin LCC
(included)
M30800T-PTC
(included)
M3T-DUMMY100S
100-pin QFP
(not included)
M3T-DIRECT100S
100-pin QFP
(not included)
Emulation probe
0.65-mm-pitch
100-pin
144-pin 0.5-mm-pitch
*1
M30800T-PTC
(included)
M3T-100LCC-DMS
(not included)
M3T-FLX100-R
(not included)
M3T-FLX100-T
(not included)
M30800T-PTC
(included)
M3T-100LCC-DMS
(not included)
M3T-FLX100-R
(not included)
M3T-FLX100-T
(not included)
M3T-FLX-100NRB
100-pin QFP
(not included)
M3T-100LCC-QSD
100-pin QFP
(not included)
M3T-FLX-100NSD
100-pin QFP
(not included)
M3T-FLX-144NSD
144-pin LQFP
(not included)
0.5-mm-pitch
M3T-F160-100NSD
100-pin LQFP
(not included)
: No. 1 pin
*1: These items are available in one package.
Figure 2.7 Connection of the M30870T-EPB and user system
CAUTION
Note on Connecting the User System:
Take care not to attach the converter board in a wrong direction. It may cause a fatal damage to the emulator
and user system.
Page 29 of 104