Renesas Emulation Probe for M32C/87 Group M30870T-EPB - Manual (Page 56)

M30870T-EPB User’s Manual 3. Usage (Emulator Debugger)
REJ10J0482-0300 Rev.3.00 February 16, 2006
(5) Resume tab
1. Automatically executing a script command
2. Restoring the last window state
Automatically executing a script command
To automatically execute a script command when starting
up the debugger, click the “Refer...” button and specify the
script file to be executed.
Clicking the “Refer...” button brings up a file selection
dialog box. The script file you have selected is displayed in
the Init File: section of the dialog box shown here. If you do
not want to automatically execute a script command, delete
the character string displayed in the Init File: section of the
dialog box.
What you specify here is reflected at only startup. If you
specify back again in the Init dialog box after startup,
whatever you specified has no effect. (Be sure to restart the
emulator debugger.)
Restoring the last window state
To restore the window state (window position and window
size) in which you last closed the debugger, select the
“Resume” check box. (This check box is by default
selected.)
Downloading the load module again
To download the load module (user program) again, select
the “AutoDownLoad” check box. (This check box is by
default deselected.)
Page 56 of 104