Roland FC-200 User Manual
Owner's manual
Table of contents
Document Outline
- Introduction
- MAIN FEATURES
- IMPORTANT NOTES
- DESCRIPTIONS
- HOW TO USE THE FC-200
- MAKING THE CONNECTIONS
- SWITCHING ON THE POWER
- SWITCHING MODES
- PROGRAM CHANGE MODE
- CONTROL CHANGE MODE
- NOTE MODE
- EXCLUSIVE MODE
- EDIT FUNCTION
- PARAMETERS WITH SETTINGS THAT CAN BE CHANGED
- MIDI Channel
- Controller Number Setting for Control Pedal
- Setting for Latch Type Control Pedal Operation
- Controller Number Setting for Expression Pedal
- Bank Select
- Bank Limit
- Output of Program Change Messages When Changing Banks
- Changing Banks Using the Number Pedals
- Controller Number Settings
- Setting for Latch Type Pedal Operation
- Note Range Setting
- Octave Shift Upper Limit Setting
- Octave Shift Lower Limit Setting
- Note On Velocity Setting
- MODE Jack Loop Setting
- ABOUT REALTIME MESSAGES AND MMC MESSAGES
- DATA TRANSFER USING MIDI
- ABOUT CHANGING THE BATTERIES
- USING MIDI
- RETURNING SETTINGS TO THEIR FACTORY DEFAULT VALUES (INITIALIZATION)
- IF YOU THINK THERE’S A PROBLEM, CHECK THESE FIRST
- ROLAND EXCLUSIVE MESSAGES
- MIDI Implementation
- MIDI Implementation Chart
- SPECIFICATIONS