Roland pt-2700 - Manual (Page 27)

27
Convenient Functions
Changing the Volume
Balance in Dual Play
You can change the volume balance between the two layered
sounds in Dual Play (p. 16).
When the Keyboard is turned on, the response is set to
“Standard.”
This setting remains in effect until the keyboard’s power is
turned off.
While holding down the [DEMO/KEY
TOUCH] button, press the corresponding
note (C7–E7).
fig.5-04.e
\
Key Description
C7 Of the two selected tones, the sound assigned to
the left TONE button sounds louder.
C#7 Of the two selected tones, the sound assigned to
the left TONE button sounds somewhat louder.
D7 Standard
D#7 Of the two selected tones, the sound assigned to
the left TONE button sounds somewhat quieter.
E7 Of the two selected tones, the sound assigned to
the left TONE button sounds quieter.
If you have recorded in Dual Play (p. 16), you can use the
operation above to play back the Performance with a
different volume balance between the two layered tones.
Changing the Depth of the
Reverb
The depth of the Reverb Effect (p. 18) can be adjusted.
There are eight levels of depth from which to choose.
This is set to “4” when the power is turned on.
Holding down the [REVERB] button, press
any TONE button.
fig.7-15.e
■ Checking the depth of the Reverb
Effect
Press and hold the [REVERB] button.
The TONE button indicators will blink to indicate the
selected depth.
Changing the Depth of the
Chorus
The depth of the Chorus Effect (p. 19) can be adjusted.
There are eight levels of depth from which to choose.
This is set to “4” when the power is turned on.
Holding down the [CHORUS] button, press
any TONE button.
fig.7-16.e
■ Checking the depth of the Chorus
Effect
Press and hold the [CHORUS] button.
The TONE button indicators will blink to indicate the
selected depth.
C7~E7
1 2 3 4 5 6 7 8 Stronger
reverb
While holding down
Press one of these buttons
While holding down
Press one of these buttons
Deeper and
more spacious
chorus
1 2 3 4 5 6 7 8