Roland pt-2700 - Manual (Page 20)

20
Playing the Keyboard
Sounding the Metronome
You can start or stop the metronome with a single button.
In addition to adjusting the tempo and time, you can also change the sound and volume
of the metronome.
fig.5-09
1.
Press the Metronome [ (ON/OFF) ] button, and the metronome will
begin sounding.
fig.5-10.e
The Metronome [ (ON/OFF) ] button indicator will blink in red and green in time
with the currently selected time. It will blink in red on the downbeats, and in green on
the upbeats.
If the Metronome [BEAT] slider is in the “0” position, the indicator will blink in green.
2.
When you press the Metronome [ (ON/OFF) ] button once again to
make the indicator go dark, the metronome will stop sounding.
fig.5-11.e
■ Adjusting the Metronome Volume
The metronome volume can be adjusted in 8 levels.
The metronome volume is set to “4” when the keyboard is turned on.
While holding down the Metronome [ (ON/OFF) ] button, also
press any TONE button.
fig.5-12.e
Press
Blinks alternately
in red and green
Dark Press
While holding down...
1 2 3 4 5 6 7 8
Press
Increases the volume Decreases the volume