ROTEL Surround Sound Processor RSP-976 - Manual (Page 23)

23
Specifications
Audio
Total Harmonic Distortion:
<0.03%
Intermodulation Distortion (60 Hz: 7 kHz):
<0.03%
Frequency Response:
10 Hz - 20 kHz, ±1 dB (line level)
10 Hz - 20 kHz, ±0.3 dB (digital level)
Signal to Noise Ratio (IHF A-weighted):
92 dB (Stereo) Analog
90 dB (Dolby Digital, dts) 0dBFs
Input Sensitivity/Impedance:
Line Level: 200 mV/47 kohms
Tone Controls (Bass/Treble):
±8 dB at 100 Hz/10 kHz
Line Output Level:
600 mV (200 mV Input)
Video
Frequency Response:
3 Hz-10 MHz, ± 3 dB
Signal to Noise Ratio:
45 dB
Input Impedance:
75 ohms
Output Impedance:
75 ohms
Output Level:
1 volt
General
Power Consumption:
40 watts
Power Requirements (AC):
115 volts, 60Hz (USA)
230 volts, 50Hz (Europe)
Weight:
6.9 Kg/15.2 lb.
Dimensions (W x H x D):
440 x 121 x 303 mm
17
3/8 " x 4 7/8 " x 12"
All specifications are accurate at the time of
printing.
Rotel reserves the right to make improvements
without notice.
Rotel and the Rotel HiFi logo are registered
trademarks of The Rotel Co, Ltd., Tokyo, Japan.
DTS is a registered trademark of Digital Theater
Systems.
Manufactured under license from Dolby Laborato-
ries Licensing Corporation. “Dolby”, “Pro Logic”,
and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation. Confidential
unpublished works © 1992 – 1997 Dolby Labora-
tories, Inc. All rights reserved.
English