Runco VX-2i User Manual

Page 50

Runco VX-2i Owner’s Operating Manual

Colors in the image are
swapped; for example, reds
appear blue or vice versa.

• The Red/Pr, Green/Y or

Blue/Pb outputs from the
source are connected to
the wrong inputs on the
VX-2i.

• Ensure that the source

outputs are connected to
the correct VX-2i input.

The projector will not turn
back on after it was powered
down, or the image disap-
pears during operation.

• The projector will not turn

on for two minutes after
power-down, to protect
the lamp.

• The lamp has failed.

• Wait two minutes until the

LED at the front of the
VX-2i turns red.

Table 5-1. Troubleshooting Chart (continued)

Symptom

Possible Cause(s)

Solution