Runco VX-2i User Manual
Page 19
Runco VX-2i Owner’s Operating Manual
9
1.
ON / OFF
Press to turn the projector on or off.
2.
IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
3.
ENTER
Press to select a highlighted menu item or confirm a changed setting.
4.
Cursor Keys (
,
,
,
)
Use these buttons to select items or settings, adjust settings or switch display
patterns.
When no menus are present on-screen, the UP and DOWN buttons toggle through
the available aspect ratios, in this order:
UP Button = Anamorphic - Standard (4:3) - Letterbox - VirtualWide - Cinema -
Virtualwide 2.35
DOWN Button = Virtualwide 2.35 - Cinema - VirtualWide - Letterbox - Standard (4:3)
- Anamorphic
Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in
this order:
LEFT Button = DVI 2 - DVI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 -
S-Video 1 - Composite
RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 -
HD/RGB 2 - DVI 1 - DVI 2
5.
LIGHT
Press to illuminate the buttons. (Not available on all models.)
6.
MENU
Press this button to access the OSD controls, or to exit the current menu and return
to the previous one.
7.
VIDEO (1)
Press to select Composite video input as the source or to enter the numeric
character “1.”
8.
COMP (Component) (2)
Press to select Component SD (480i/576i) video input as the source or to enter the
numeric character “2.”
Virtualwide 2.35 is available only on CineWide-equipped projectors.
For more information about aspect ratios, refer to Table 4-1.
Note