Runco VX-2i - Manual (Page 46)

Operation
36 Runco VX-2i Owner’s Operating Manual
ISF Day - Display Color: Refer to ISF Night - Display Color.
ISF Day - Input Image: Refer to ISF Night - Input Image.
ISF Day - Input Color: Refer to ISF Night - Input Color.
Output Shift: The controls in the Output Shift menu are similar to those in the Input
Position menu, except that they change the characteristics of the output signal (so the
change is visible no matter which input is selected).
Splash Configure: Use the Splash Configure menu to customize the appearance of the
start-up message that appears on the vacuum fluorescent display upon power-up. You
can have the VX-2i display the owner’s name, your name, the phrase “ISF Calibrated”
and/or any other string, up to 20 characters in length.
Use the up or down cursor button to select a character. Use the right and left cursor
buttons to change the cursor position. Press MENU when you have finished entering text.
Then, check the “Splash Enable” box to have the VX-2i display the information you enter
here when it is turned on.
OSD Position: Select OSD Position, press ENTER and use the arrow buttons to change
the size and position of the OSD controls.
Service Use the Service menu to access advanced projector configuration settings. This menu
should be used by ISF-certified technicians only.
Test Video: Select Test Video from the Service Menu to access the internal test patterns
on the VX-2i. Four patterns are available, consisting of white/gray or colored bars. These
are useful for calibrating other theater source components (DVD player, HD tuner etc.) that
have their own picture controls.
Press MENU to exit test pattern mode.
Language: Select Language from the Service menu and press the up- or down-arrows to
select the OSD Language (English, French, Spanish or German).
Service
Test Video
Language
Remote Control
Display Device
HD Format
Triggers
Miscellaneous
System Reset
➤
You must enter a passcode to access the Service menu.
Note