Radio Shack 43-3578 - Manual (Page 9)

9
Installation
INSTALLATION
S
ELECTING A
L
OCATION
You can place the phone’s base on a
desk or table, or mount it on a standard
wall plate or directly on a wall. Select a
location that is:
• near an accessible AC outlet
• near a telephone line jack
• out of the way of normal activities
• away from electrical machinery,
electrical appliances, metal walls
or filing cabinets, wireless
intercoms, alarms, and room
monitors
• away from other cordless phones
The base’s location affects the hand-
set’s range. If you have a choice of
several locations, try each to see which
provides the best performance.
CAUTION
You must use
a Class 2
power
source that supplies
9V DC and delivers at
least 210 mA. Its
center tip must be set
to positive and its plug
must fit the phone’s
DC IN 9V jack. The
supplied adapter
meets these specifi-
cations. Using an
adapter that does not
meet these specifica-
tions could damage
the phone or the
adapter.
• Always connect the
AC adapter to the
phone before you
connect it to AC
power. When you
finish, disconnect the
adapter from AC
power before you
disconnect it from the
phone.
!
43-3578.book Page 9 Thursday, February 12, 2004 3:12 PM