Radio Shack 43-3578 - Manual (Page 13)

13
Installation
To charge the battery pack, place the
handset on the base. The CHARGE/IN
USE indicator on the base lights and
Total:00 appears on the handset
display.
Recharge the battery pack when Low
Battery flashes on the display.
If you have trouble replacing the battery
pack, take the phone to your local
RadioShack for assistance.
o
!
Recharging the Battery Pack
• When you first use the phone after
charging or recharging the battery
pack, the phone might not work
and you might hear an error tone
when you press
TALK/FLASH .
While holding PAGE , return the
handset to the base for about 3
seconds to reset the security
access-protection code.
• If the base loses power for about
an hour while the handset is away
from it, the security access-
protection code might be lost. To
reset the code, while holding
PAGE , return the handset to the
base for about 3 seconds.
o
WARNING
o
Dispose of the old
battery pack promptly
and properly. Do not
burn or bury it. There is a
risk of explosion if
battery is replaced by an
incorrect type. Dispose
of used batteries
according to the
instructions.
!
IMPORTANT
!
Be sure the battery pack
is properly connected
before you try to charge
it. The
CHARGE/IN USE
indicator lights when the
handset is on the base,
even if the battery pack
is not connected.
43-3578.book Page 13 Thursday, February 12, 2004 3:12 PM