RCA VGM300 - Manual (Page 29)

27
References
Location of Controls
Back Panel
ANTENNA IN Connector
Receives the signal from an antenna or cable
system that is attached to this connector.
ANTENNA OUT Connector
Passes signal to TV using the coaxial cable
supplied.
VIDEO and AUDIO IN Jacks
Receives signals from another component, like
a VCR or camcorder, when it is connected to
these jacks. Use INPUT to select L1 in the
VCRÕs display panel to record from these jacks.
VIDEO and AUDIO OUT Jacks
Sends signals from VCR to another component,
like a TV monitor or VCR, when it is connected
to these jacks.
VIDEO
IN
OUT
ANTENNA
AUDIO
IN
OUT
IN
OUT
continued on next page
Display Panel
This VCR has a feature that allows you to change the brightness level of the fluorescent
display panel.
1 . Press MENU•PROG on the remote to see the VCR MAIN
MENU on the TV screen.
2 . Press 4 to display the PREFERENCES menu.
3 . Press 2 to select Front Panel: AUTO, BRIGHT, or DIM.
¥ Select AUTO to keep the display panel bright when VCR
is on and dim when it is off.
¥ Select BRIGHT to keep the display panel bright.
¥ Select DIM to keep the display panel dim.
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
PREFERENCES
1 Remote Control: VCR1
2 Front Panel: AUTO
3 Output Channel: 3
4 Video System: AUTO
5 Play NTSC as: NTSC
0 Exit