RCA VGM300 - Manual (Page 13)

11
Using the Remote Control
Controlling a VCR
The VCRÕs remote controls two compatible GE, RCA, or ProScan VCRs with
the VCR1 and VCR2•LD buttons. Most compatible VCRs automatically
respond to VCR1 without being programmed. If you own two compatible
VCRs, test them to see if VCR1 turns on both VCRs. If it does, then you may
want to program this VCR to respond to the VCR2•LD button on the remote.
Program the VCR for Remote Control
Set the Remote Control feature of the VCR to the
VCR1
or VCR2•LD position. The remote then
controls the VCR with either the VCR1 or
VCR2•LD
button Ñ whichever position you
select in the menu.
1 . Press MENU•PROG to display the VCR
MAIN MENU .
2 . Press 4 to display PREFERENCES.
3 . Press 1 to activate the Remote Control
feature.
4 . Press VCR1 or VCR2•LD to change the
setting and program this VCR to respond to
the VCR1 or VCR2•LD button Ñ whichever
you select.
Important Reminder: Remember you must
press VCR1 or VCR2•LD on the remote Ñ
whichever you selected in the menu Ñ
before the remote will operate this VCR.
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
PREFERENCES
1 Remote Control: VCR1
2 Front Panel: AUTO
3 Output Channel: 3
4 Video System: AUTO
5 Play NTSC as: NTSC
0 Exit
PREFERENCES
1 Remote Control: VCR1
2 Front Panel: AUTO
3 Output Channel: 3
4 Video System: AUTO
5 Play NTSC as: NTSC
Press VCR2 to change