RCA VGM300 - Manual (Page 15)

13
Using the Remote Control
Buttons
CHANNEL Up or Down
Selects next higher or lower
channel in the TVÕs channel
memory when remote is set to
control a TV.
CLEAR
Removes menus or status
displays from the screen.
DISPLAY
Shows the status displays on the
screen.
Removes menus or displays from
the screen.
MUTE
Turns the TV sound on or off.
Numbers (0 through 9)
Select a channel up to 99 by
pressing two numbers.
Select a cable channel over 99 by
pressing and holding 1 until 1– –
appears on the screen. Then press
the other two numbers.
POWER
Turns off a compatible TV when
remote is set to control TV.
Used with TV button to turn on a
compatible TV, other than GE,
when the remote is programmed
to control that TV. See page 14.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then use
the number buttons to select the
other channel. Press PREV CH to
switch between the two channels.
SLOW + and Ð
Used with the TVÕs menus to
select and adjust features.
VOL (Volume) Up or Down
Raises and lowers sound of TV.
PLAY
Plays a tape.
POWER
Turns off VCR when remote is set
to control the VCR.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then use
the number buttons to select the
other channel. Press PREV CH to
switch between the two channels.
REC (Record)
Starts VCR recording.
Used for one touch recording
(OTR). See page 24.
REW (Rewind)
Rewinds the tape when the VCR
is stopped.
Searches the picture in reverse
motion during playback.
SEARCH
Displays INDEX and ZERO
SEARCH
menus on the TV screen.
Advances tape 60 or 120 seconds
during playback.
SLOW – / +
Used for slow-motion forward
playback.
SPEED (Tape Speed)
Selects a recording speed
(SP, LP, SLP).
STOP
Stops the normal functions such
as record, playback, rewind, fast
forward, and pause of the VCR.
TRACKING Up or Down
Lets you manually reduce the
streaks that may appear on the
picture during play or pause.
Reduces picture ÒjitterÓ during
stop-action playback.
TV•VCR
Switches the picture signal so
that it either comes from the VCR
or the TV channel. See page 10.
VCR Function Buttons
(continued)
TV Function Buttons
Press the TV button to set remote to control a compatible TV. Some buttons may not work with the TV.