RCA VGM300 - Manual (Page 26)

24
Recording a Program
One Touch Recording
One touch recording lets you record up to four hours without using the timer program feature. The VCR
will turn off automatically at the end of the recording.
SLP VCR
H M
RECORD
Display showing 30
minutes remaining for one
touch recording.
C
SEARCH
VOL VOL
MUTE
PREV CH
DISPLAY
INPUT
1
4
7
TV•VCR
3
6
9
2
5
8
0
CLEAR
SPEED
REW
PLAY
FF
STOP
PAUSE
REC
MENU
PROG *
POWER VCR1
TV
VCR2•LD
CHAN
CHAN
TRACKING
3
4
SLOW –
+
EDIT
F.ADV
Stopping a Recording in Progress
With the VCR: Press POWER and then STOP
within a few seconds.
With the Remote: Press VCR1 (VCR2•LD) and
then STOP within a few seconds.
Each press increases the time Ñ 30 minutes up to four
hours.
The amount of time the VCR will record and X– REC
will appear in the VCRÕs display panel.
You can increase the amount of recording time by
pressing REC on the remote or RECORD on the VCR.
RECORD LENGTH 0:00
CH 04
Press REC to set length
One Touch Display on
TV Screen
Press Recording
RECORD Time
0:30 ( 30 Min)
1:00 (1 Hr)
1:30 (1 Hr, 30 Min)
2:00 (2 Hrs)
3:00 (3 Hrs)
4:00 (4 Hrs)
0:00 (OTR Turns Off)
Operating Instructions
1. Turn on the VCR.
2. Insert a tape with safety tab in place.
3. Select the channel you want to record.
4. Select the desired recording speed using SPEED on the
remote.
5. Press REC on the remote or RECORD on the VCR to activate
recording.
6. Press REC on the remote or RECORD on the VCR repeatedly
until the amount of recording time for the program is
displayed in the VCRÕs display panel or on the TV screen.