Quick start, Making connections – Roland SP-303 User Manual
Page 11
11
Quick Start
QUICK START
Making Connections
The SP-303 does not contain an amp or speaker. To hear
sound, either connect an amplifier and speakers or use
headphones. Refer to the following diagram and connect the
SP-303 to the other equipment.
* Audio cables, MIDI cables, stereo headphones, and
microphones are not included. These may be purchased
separately from your dealer.
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
fig.Q01
DJ system setup
fig.Q02
When sampling from a record, set the mixer fader to the
Turntable position (maximum).
The volume level during sampling is adjusted by the SP-
303’s REC level (p. 28, 30) and by the mixer’s effect send
level.
Mixer settings
CH 1 Input: line
Effect: OFF
CH 2 Input: PHONO
Effect: ON
* Settings may be different depending on the mixer. For details
refer to the owner’s manual for your mixer.
AC Adaptor
(ACI or ACB series)
MIDI Sequencer etc.
CD/MD player
Stereo Headphones
Microphone
OUTPUT
MIDI OUT
MIDI cable
to an AC Outlet
Audio Set / Amplified Speaker etc.
LINE IN
Audio Cable
EFFECT
SEND
CH 1:
LINE IN
CH 2:
PHONO IN
LINE
OUT
LINE
IN
SP-303
Turntable