Ricoh Aficio LD122 - Manual (Page 88)

User Tools (System Settings)
76
4
GGGG
Press [Fax Dest.].
HHHH
Enter the fax number using the
number keys, and then press [OK].
To select the line
A Press [Select Line].
B Select the line, and then press
[OK] .
To program the SUB Code
A Press [Adv. Features], and then
select [SUB Code].
B Press [Change] under TX SUB
Code.
C Enter a SUB Code using the
number keys, and then press
[OK]
.
D To enter a password, press
[ C h an g e ] un der Pas sw ord
(SID).
E Enter a password using the
number keys, and then press
[OK]
.
F Press [OK].
To program the SEP Code
A Press [Adv. Features], and then
select [SEP Code].
B Press [Change] under RX SEP
Code.
C Enter a SEP Code using the
number keys, and then press
[OK]
.
D To enter a password, press
[ C h an g e ] u nd er P as sw or d
(PWD).
E Enter a password using the
number keys, and then press
[OK]
.
F Press [OK].
To set the International TX mode
A Press [Change] under Interna-
tional TX Mode.
B Select [OFF] or [ON], and then
press [OK].
To select the fax header
Note
❒ You can register the fax header
name in Program Fax Informa-
tion under the system settings
of Facsimile Features. See Fac-
simile Reference tures>.
A Press [Change] under Fax Head-
er.
B Select [1st Name] or [2nd Name],
and then press [OK].
RussianC3_AEgsg-F_FM.book Page 76 Monday, June 16, 2003 6:35 PM