Ricoh Aficio LD122 - Manual (Page 116)

User Tools (System Settings)
104
4
To change a port number
A Press [Change] under Port No..
B Enter the new port number us-
ing the number keys, and then
press [#].
To change authentication
A Press [Next].
B Select [ON] or [High Security] if
you want to activate authenti-
cation. Select [OFF] to cancel it.
Note
❒ [High Security] is not available
when the LDAP Version is 2.
❒ When [ON] or [High Security]
is selected, the administrator
account name and password
is required to acc ess the
LDAP server.
❒ When [High Security] is select-
ed, you can use a generic
password unique to the net-
work. If you do this, the serv-
er also requires the same
setting. For details, ask your
network administrator.
To change the user name and
password
A Press [Next].
B Press [Change] under User
Name.
C Enter the new user name, and
then press [OK].
D Press [Change] under Password.
E Enter the new password, and
then press [OK].
Note
❒ The user name and password
are of a user who is author-
ized to access the LDAP serv-
er.
❒ You can press [Connection
Test] to check if the new set-
tings work.
To change search options
A Press [Next] twice.
B Press [Change] under Attribute.
C Enter a new attribute, and then
press [OK].
D Press [Change] under Key Dis-
play.
E Enter the attribute's new dis-
play name, and then press [OK].
FFFF
Press [OK].
GGGG
Press [Exit].
HHHH
Press the
{{{{User Tools/Counter}}}} key.
RussianC3_AEgsg-F_FM.book Page 104 Monday, June 16, 2003 6:35 PM