Ringdale ISDN - Manual (Page 77)

77
Task 2: Select the Unit Information
Step 1: Select a Unit Name
From the Setup dialog box
Unit Name appears under Unit Information, shown above.
This is the router name that appears in the OverLAN
Commander main menu. If more than one router is
installed, the name should reflect the location of the router
or the networks it is connecting. No two routers should
have the same name.
Unit Name should already have a default name. If you want
to keep this name then you can go to Step 2.
Otherwise, erase the default Unit Name and type in a new
name of up to 10 letters and/or numbers.
You have set the Unit Name.
Step 2: Select a Console Password.
Console Password appears under Unit Information, above.
It is used to protect your configuration settings.
CONFIGURING YOUR ROUTER