Ringdale ISDN User Manual
Page 134
134
Then the prompt
Default Gateway : Disabled
will appear if Provider Mode is not enabled.
The default of Default Gateway is Disabled.
Pressing the spacebar switches between Disabled and Enabled.
Choices:
• Enabled allows a router or device on your Ethernet
network to act as a default address for handling IP
packets with destinations that cannot be determined by
static routing tables or by dynamic routing.
• Disabled allows your router to simply discard packets
with destinations that cannot be determined by static
routing tables or by dynamic routing.
Press the Enter key when you are ready to continue.
CONFIGURING WITH A LOCAL CONSOLE