Ringdale ISDN - Manual (Page 139)

139
Task 6: Configuring the IPX Protocol
From the Setup Menu,
Press 5
to configure the IPX Protocol.
The prompt
IPX Routing : Disabled
will appear at the bottom of the video display.
The default of IPX Routing is Disabled.
Pressing the spacebar switches between Disabled and Enabled.
Choices:
• Enabled allows your router to route Novell IPX
packets.
• Disabled prevents your router from routing Novell
IPX packets.
Press the Enter key when you are ready to continue.
CONFIGURING WITH A LOCAL CONSOLE