Ringdale ISDN User Manual
Page 104
104
CONFIGURING WITH A LOCAL CONSOLE
The prompt
Remote Management : [DISABLED]
will appear beneath the previous prompt.
The default of Remote Management is Disabled.
Pressing the spacebar on the keyboard will change the setting
to Enabled. Pressing the spacebar again will change the
setting back to Disabled, and so forth.
Choices:
• Disabled prohibits the remote site from managing the
router.
• Enabled allows the router to be managed from the remote
site (the site being called or that is calling). When enabled,
the local site is still able to manage the router. But, it is
recommended that a router be managed by only one site. If
more than one site must be used to manage a router, it is
recommended that if you are using OverLAN Commander
you should exit after each session is complete.
Press the Enter key when you are ready to continue.