Setup: overlan commander 32/ip (windows 95/nt), Method 2: overlan commander 32/ip – Ringdale ISDN User Manual
Page 19
19
METHOD 2: OverLAN Commander 32/IP
Introduction
OverLAN Commander 32/IP for Windows 95/NT is
provided on two 3.5-inch floppy disks with the OverLAN
Ethernet/ISDN router.
To use OverLAN Commander 32/IP for configuring and
maintaining your router, you will need a computer
(preferably equipped with a mouse) running Microsoft
Windows 95 or NT. Windows must be setup for TCP/IP and
the computer must be connected to your Ethernet network.
You should be familiar with using Microsoft Windows. If not,
please refer to the manual for that product.
The basic layout of OverLAN Commander is shown in the
figure below.
CONFIGURING YOUR ROUTER