beautypg.com

Ricoh CL3000DN User Manual

Page 62

background image

Troubleshooting

58

5

Replace
Waste Toner

It is time to replace the waste
toner bottle.

Replace the waste toner bottle
with a new waste toner bottle.

See p.29 “Replacing Consum-
ables and Maintenance Kit”.

Reset PCU

Correctly

The black or color PCU is not
set correctly or is not set.

Set the black or color PCU cor-
rectly.

See p.29 “Replacing Consum-
ables and Maintenance Kit”.

Reset Fusing

Unit Correctly

The fusing unit is not set cor-
rectly or is not set.

Set the fusing unit correctly.

See p.29 “Replacing Consum-
ables and Maintenance Kit”.

Reset Paper

Bypass Tray

There is paper left in the By-
pass Tray.

Remove paper from the By-
pass Tray, and then reset the
paper.

Reset Toner

/Yellow/Magenta/Cy-
an/Black

The indicated toner car-
tridge(s) is/are not set correct-
ly

Set the indicated toner car-
tridge correctly.

See p.29 “Replacing Consum-
ables and Maintenance Kit”.

Reset Tray #

Correctly

The indicated tray is not set or
is not set correctly.

#: tray number

Set the tray correctly.

Or press the

{{{{Form Feed}}}} key

several times until the tray
with the desired paper setting
appears on the panel display.

Or press the

{{{{Job Reset}}}} key to

cancel the print job.

Reset

Duplex Unit

The duplex unit is not set cor-
rectly or is not set.

Remove and reinstall the du-
plex unit. If the message ap-
pears again, contact your sales
or service representative. See
the Option Setup Guide.

Replace

Transfer Belt

It is time to replace the trans-
fer belt.

Replace the transfer belt with
a new transfer belt.

See p.29 “Replacing Consum-
ables and Maintenance Kit”.

SC XXX-X

Power Off On

The Service Code or SC
number indicates the prob-
lem.

Turn the power switch off and
on. If the message appears
again, contact your sales or
service representative.

Toner is Almost

Empty: Black

The black toner is almost emp-
ty.

Prepare a new black toner car-
tridge.

Toner is Almost

Empty: Cyan

The cyan toner is almost emp-
ty.

Prepare a new cyan toner car-
tridge.

Messages/Second messages

Description

Solution

AresPGBMaintGuide-F_FM.book Page 58 Friday, July 26, 2002 5:17 PM

This manual is related to the following products: