Ricoh CL3000DN - Manual (Page 29)

Loading Paper
25
2
AAAA
Open the Bypass Tray.
BBBB
Extend the Bypass Tray.
CCCC
Slide the side guides outward
A A A A ,
and then load paper until it stops
with the print side down
B B B B.
DDDD
Adjust the side guides to the pa-
per width.
Important
❒ Confirm that the top of the stack
is not higher than the limit mark
inside the tray.
❒ Shuffle the paper before loading
the stack onto the tray so multi-
ple sheets are not fed in at the
same time.
EEEE
Set the paper size using the con-
trol panel as follows:
A Press the {{{{Menu}}}} key.
"Menu" appears on the panel
display.
B Press the {{{{U U U U}}}} or {{{{T T T T}}}} key to dis-
play "Paper Input", and then
press the
{{{{Enter #}}}} key.
C Confirm that "Bypass Size" is
displayed, and then press the
{{{{Enter #}}}} key.
ZHBY070E
ZHBY080E
ZHBY090E
Menu:
Paper Input
Paper Input:
Bypass Size
ZHBY100E
AresPGBMaintGuide-F_FM.book Page 25 Friday, July 26, 2002 5:17 PM