Ricoh CL3000DN - Manual (Page 14)

Getting Started
10
1
Guide to the Printer
Exterior: Front View
1. Standard Tray
Output is stacked here with the print side
down.
2. Upper Left Cover
Open this cover when replacing toner
cartridges.
3. Ventilator
The ventilator helps to keep the compo-
nents inside the printer from overheat-
ing. Do not block the ventilator as it may
cause a printer malfunction due to over-
heating.
4. Control Panel
Contains keys for printer control and a
panel display that shows the printer sta-
tus.
5. Front Cover
Open this cover when replacing the fus-
ing unit or transfer roller, installing the
Duplex Unit, or removing misfed paper.
6. Bypass Tray
Use to print onto thick paper, OHP trans-
parencies, custom size paper, and enve-
lopes as well as plain paper. When
printing on custom size paper , printer
driver settings are required.
7. Tray 1
Up to 530 sheets of plain paper can be
loaded.
ZHBH020E
4
5
6
7
1
2
3
AresPGBMaintGuide-F_FM.book Page 10 Friday, July 26, 2002 5:17 PM