Ricoh CL3000DN - Manual (Page 46)

Replacing Consumables and Maintenance Kit
42
3
Intermediate Transfer Unit Type 125
R CAUTION:
Replace the transfer belt when the fol-
lowing message appears on the panel
display.
or
Check the contents of the box for the
following items:
❖ ❖ ❖ ❖ Transfer Belt
Important
❒ Be sure to make the setting from
the control panel after replacing
the transfer belt. Without it, the
procedure is incomplete.
AAAA
Turn off the power.
BBBB
Open the right cover of the print-
er.
CCCC
Remove the Waste Toner Bottle.
Reference
See p.32 “Waste Toner Bottle
Type 125”.
DDDD
Pull out the green levers on the
left and right that are fastening
the inner cover to unlock the le-
vers.
• The inside of the machine be-
comes very hot. Do not touch the
parts with a "
v" label (means
hot surface). Touching a part
with a "
v" label (means hot sur-
face) could result in a burn.
Replace Transfer
Belt soon
Replace
Transfer Belt
ZHBH510E
ZHBH290E
ZHBH300E
AresPGBMaintGuide-F_FM.book Page 42 Friday, July 26, 2002 5:17 PM