Ricoh CL3000DN - Manual (Page 48)

Replacing Consumables and Maintenance Kit
44
3
JJJJ
Raise the green cover, hold the
transfer belt as shown, and then
remove the transfer belt.
Important
❒ Be sure to hold the unit with
both hands, and then pull it out
slowly.
❒ Do not touch the belt part.
KKKK
Take out the new transfer belt.
LLLL
Holding the transfer belt as
shown, insert the transfer belt in
the printer.
MMMM
Close the green cover, and then
insert it until it stops.
NNNN
Turn the green screws on the left
and right in the direction of the
arrows to tighten them.
OOOO
Place the waste toner bottle in the
position as shown in the illustra-
tion.
ZHBH540E
ZHBH560E
ZHBH920E
ZHBH580E
ZHBH660E
AresPGBMaintGuide-F_FM.book Page 44 Friday, July 26, 2002 5:17 PM