Ricoh CL3000DN User Manual

Page 27

Loading Paper

Changing paper size of the paper tray

AAAA

Pull the paper tray out of the
printer until it stops. After that,
lift it slightly, and then pull it out
completely. Place it on a flat sur-
face

BBBB

Remove the paper.

CCCC

Press "Push", and then adjust the
rear guide to the paper size you
are using.

DDDD

Adjust the side guides to the pa-
per size you want to load.

EEEE

Load paper into the paper tray,
with the print side up.

Important

❒ Confirm that the top of the stack

is not higher than the limit mark
inside the tray.

FFFF

Slide the paper tray completely
into the printer.

Specifying a paper type

By selecting the paper type you want
to load, the printer can perform print-
ing better.
You can select from the following pa-
per types:
• Plain Paper, Recycled Paper, Spe-

cial Paper, Color Paper, Letter-
head, Preprinted, Prepunched,
Bond Paper, Cardstock

ZHBY010E

ZHBY030E

ZHBY040E

ZHBY060E

ZHBY020E

AresPGBMaintGuide-F_FM.book Page 23 Friday, July 26, 2002 5:17 PM

This manual is related to the following products:

CL3000