Checking the chartplotter operation – Raymarine Chartplotter User Manual
Page 84
Chapter 5: Installation
5-11
Checking the Chartplotter Operation
To confirm that your chartplotter is operating correctly, perform the following
checks:
1.
Without a Navionics Microchart
®
card fitted, verify that the world map is
visible.
2.
Press the trackpad left/right, up/down and check cursor movement and
normal scrolling action.
3.
Insert a Navionics Microchart
®
card for the area of your vessel.
Use the RANGE key to zoom-in to check that the new chart cartridge is
being displayed.
4.
Ensure that position data is available; use the FIND SHIP function to check
that the cursor is fixed on the vessel symbol which is correctly positioned
at the centre of the chart display, see Chapter 3, Operation.
See also other documents in the category Raymarine GPS receiver:
- RAYTHEON E32001 (13 pages)
- RAYCHART 420 (101 pages)
- L365 (83 pages)
- SR50 (48 pages)
- A65 (100 pages)
- RS12 (50 pages)
- DSM300 (82 pages)
- NMEA Multiplexer (16 pages)
- Pathfinder (111 pages)
- Pathfinder Radar (244 pages)
- autopilot control unit (111 pages)
- VolvoPenta IPS Autopilot System DPU (16 pages)
- autopilot + ST4000+ (145 pages)
- stand-alone master instrument (45 pages)
- ST80 (15 pages)
- Raystar 125 (8 pages)
- RS12 (38 pages)
- ST6001 (48 pages)
- Pathfinder Radar Scanners (66 pages)
- Heading Sensor (24 pages)
- Ray430 (54 pages)
- Viewable Marine Displays (38 pages)
- Marine GPS System (188 pages)
- C Series (244 pages)
- ST8001 (48 pages)
- hsb2 PLUS Series (246 pages)
- 631 PLUS (170 pages)
- navigation system (17 pages)
- ST8002 (48 pages)
- PowerPilot (18 pages)
- ST7002 (52 pages)
- GPS Kit (24 pages)
- 465 (107 pages)
- Ray54E (116 pages)
- GPS Plotter (131 pages)
- GPS navigation (75 pages)
- ST7001 (48 pages)
- 300 (136 pages)
- Raystar 120 (30 pages)
- autopilot (137 pages)
- DSM30 (34 pages)
- Platinum Chart Card (29 pages)
- ST6002 (56 pages)
- 320 (139 pages)